 The
X5100 series pneumatic inkers are designed for the Electroglas Horizon Series 4060, 4080
and 4090 probers. The X5100 inkers mount in the prober’s optical bridge making it
ideal for high speed, off-line and post-probe inking.The X5100 series offers
outstanding, reliable performance and produces up to 12 dots per second. The X5100 inkers
incorporate the convenience of the DieMark™ cartridges with the dependability of a
pneumatic controller for the ultimate inking solution.
Pneumatic inkers provide a non-invasive approach to marking by eliminating direct
contact with the wafer surface. Ink is deposited via pneumatic actuation of the shuttle
and a pulse of air into the cartridge reservoir. When the shuttle reaches full downward
travel, a drop of ink is deposited on the wafer.
The pneumatic DieMark™ ink cartridges feature a Teflon tube inside of a stainless
steel needle. When the cartridge is opened, the needle punctures the reservoir membrane to
provide ink flow through the Teflon tube.
Features and Benefits
- Programmable dot counter
- Automatic cartridge priming
- Dot range of 15-50 mil, depending on cartridge size
- Uses DM-2.3 disposable cartridges, pre-filled, factory tuned and
available in A5, A6 and A8 sizes
- Available inks: Xandex
8103,
8104,
7824
or 7824T and Markem™ 6990, 6993
or 6997
- The innovative X5100 micro-design allows the inker to mount in the
prober’s optical bridge with minimal protrusion above the ring carrier.
- Providing excellent test head clearance, the X5100 is
suitable for
overhead testing applications.
|
