| Xandex offers variety of inks for
all applications. Please consult the following for general information on Xandex inks to help you choose the
optimal ink for your application.
|
Pneumatic
Ink Cartridges (DM-2 & DM-2.3)
 The heart of all pneumatic inking
systems is the DieMark DM-2 disposable ink cartridge. The DM-2 is
pre-filled and factory tuned to eliminate labor intensive inker
related delays in the test area: ink mixing, refilling, adjustments,
cleaning and rework. DM-2 contains 60% more ink than standard
DieMark cartridges ensuring consistent dots and long life at any
speed.
The DM-2 has a polypropylene ink
reservoir, which is sealed by a threaded cap at the top and a thin membrane
at the bottom. The traditional fishline has been replaced
by a small Teflon tube encased in a stainless steel needle. When the
cartridge is opened, the needle punctures the reservoir to provide
ink flow. |
Electric
Ink Cartridges (DM-1, DM-1.25 &
DM-S)
 Electric
inkers utilize DieMark cartridges for the ultimate inking solution.
DieMark cartridges offer reliable, consistent, trouble free operation
with the benefit of a disposable unit. Pre-filled factory tuned
cartridges are easy to use - no adjusting, refilling or cleaning. All
inks utilized in the cartridges have been selected to produce consistent
dots over a wide range of speeds without dripping, or skipping. Three
needle configurations are available to afford optimal visual/physical
inker clearance.
|
| Cartridge Types |
| DM-1 |
Nylon monofilament (5 mil also with tungsten
wire), 0.75" straight needle |
| DM-1.25 |
Nylon monofilament, 1.25" straight needle |
| DM-S |
Curved needle, nylon monofilament |
outline
drawing (PDF
53KB) |
| DM-2 |
Pneumatic, 0.50"
needle, Teflon tube (no filament) |
| DM-2.3 |
Pneumatic, 0.30" needle, Teflon tube (no
filament) |
Ink
Types
Xandex 8103 |
Xandex 8104 | Xandex 7824 and
7824T
| Markem®
6990 |
Markem®
6993 |
Markem®
6997
| Xandex 8103 |
data
sheet here |
Guidelines
for Use |
8103
black msds |
8103
red msds |
| Ink Type |
Phenoxy with dye coloring agent |
| Colors |
Black,
Red |
| Characteristics |
Premium ink
with sodium and chloride levels
certified less than 10 PPM. Opaque and highly resistant to most
post-probe processes. Air dry or heat
set. Acetone
soluble prior to drying. Difficult to remove after cure. Flows consistently
after opening for 2-3 days in DM-2s and 2 days for DM-1s. Very high in viscosity yet dries rapidly at ambient
temperatures. Produces small dots. Ideal for continuous,
offline inking. |
| Shelf Life |
Four months |
| Configurations |
DM-1 |
5, 8, 10, 15,
25 and 30 mil |
|
DM-2 & DM-2.3 |
A5, A6, A8 |
 |
|
|
| Xandex
8104 |
data
sheet here |
8104
black msds |
| Ink Type |
Phenoxy with dye coloring agent |
| Colors |
Black |
| Characteristics |
Premium ink
with sodium and chloride levels
certified less than 20 PPM. Opaque and highly resistant to most
post-probe processes. Air dry or heat
set. Acetone
soluble prior to drying. Difficult to remove after cure. Flows consistently for 2-3 days
after opening. Very low in viscosity yet dries rapidly at ambient
temperatures. Produces large dots. |
| Shelf Life |
Four months |
| Configurations |
DM-2 & DM-2.3 |
A5, A6, A8 |
|
|
|
| Xandex 7824 and 7824T |
7824
msds |
7824T
msds |
| Ink Type |
Phenoxy with dye coloring agent |
| Colors |
Black |
| Characteristics |
Premium ink with sodium and chloride levels
certified less than 10 PPM. Very opaque and highly resistant to most
post-probe processes. Air dry or heat
set. Acetone
soluble prior to drying. Difficult to remove after cure. Flows consistently for 2-3 days
after opening. Use 7824T when a high viscosity is desired. |
| Shelf Life |
Four
months |
| Configurations |
DM-1 |
5, 8, 10, 15,
25 and 30 mil |
| DM-1.25 |
15, 25 mil |
| DM-2 & DM-2.3 |
A5, A6, A8 |
|
|
|
| Markem® 6990 |
6990
black msds |
|
|
| Ink Type |
Phenoxy with dye coloring agent |
| Colors |
Black |
| Characteristics |
Premium ink - sodium and chloride levels
certified less than 25 PPM. Requires heat curing. Alcohol/acetone soluble prior to
cure.
Flows very consistently for up to five days after opening. |
| Shelf Life |
Four months |
| Configurations |
DM-1 |
5, 8, 10, 15,
25 and 30 mil |
| DM-1.25 |
10, 15, 25 mil |
| DM-S |
10, 15 mil |
| DM-2 & DM-2.3 |
A5, A6, A8 |
|
|
|
| Markem® 6993 |
6993
black msds |
6993
red msds |
6993
green msds |
| Ink Type |
Phenoxy with dye coloring agent |
| Colors |
Black, Red, Green |
| Characteristics |
Most widely used die sorting
ink. Requires heat curing. Alcohol/acetone soluble prior to
cure. Flows very consistently for up to five days
after opening. Green may be too transparent for some automatic die picking equipment.
Contaminant levels not certified by Markem or Xandex.
Periodic test data indicates less than 100 ppm Sodium and
300 ppm Chloride. |
| Shelf Life |
Four months |
| Configurations |
DM-1 |
5, 8, 10, 15,
25mil, (30 mil-black
and red only) |
| DM-1.25 |
10, 15, 25 mil |
| DM-S |
10, 15 mil |
| DM-2 & DM-2.3 |
A5, A6, A8 |
|
|
|
| Markem® 6997 |
6997
black msds |
6997
red msds |
| Ink Type |
Phenoxy with dye coloring agent |
| Colors |
Black, Red |
| Characteristics |
Requires heat curing. Alcohol/acetone soluble prior to
cure. Flows very consistently for up to five days
after opening. Red may be too transparent for some automatic die picking equipment.
Contaminant levels not certified by Markem or Xandex.
Periodic test data indicates less than 100 ppm Sodium and
300 ppm Chloride. |
| Shelf Life |
Four months |
| Configurations |
DM-1 |
5, 8, 10, 15,
25 and 30 mil |
| DM-1.25 |
10, 15, 25 mil |
| DM-S |
10, 15 mil |
| DM-2 & DM-2.3 |
A5, A6, A8 |
|
